Jacuzzi PORTABLE WHIRLPOOL SPA User Manual

19

DRAIN
PIPING

TO VALVE
AND DRAIN

CEMENT 1-1/2" PVC
PIPING TO ELBOW

INSTALL AND CEMENT
1-1/2" x 1-1/2" 90

°

 PVC

 ELBOW

KEEP HOSE BIBB
CLOSED

DRAIN VALVE
(HOSE BIBB)

CUT FLUSH WITH
PVC CAP AND
DISCARD CAP

1-1/2" PVC CAP

CUT

TO SUCTION
PLUMBING

NOTE:  A hole will have to be cut in
the side of the spas pan so drain pipe
will have access to the drain.

WATER RAINBOW
SPOUT

INSTALL AND CEMENT
3/4" PVC CAP

UNSCREW 3/4" PIPE
FROM WATER RAINBOW
AND DISCARD

You can use your Water Rainbow spout as a fill spout by

permanently plumbing it to a fresh water supply if local
codes permit.  Local plumbing codes may require the use of
an anti-siphon valve for such a connection.  Do not inter-
connect water supply with recirculating system of the
spa.

To make the connections necessary to use the Water

Rainbow as a fill spout, follow this procedure:

• Make sure power to the spa has been turned off and that

the spa is completely drained.

• Unscrew the spout from the 3/4" pipe.

• Cut 3/4" piping as shown in the illustration below.

• Cap off the piping by cementing a 3/4" PVC cap where cut

has been made.

• Connect permanent plumbing line to the spout.

If you wish to connect a permanent drain line to the 1-

1/2" plumbing of the spa, you may modify the plumbing as
shown in the illustration as shown in the illustration on this
page.  Note that none of the piping required for the
modification is provided.  Consult local codes before
modifying.