Datalogic Scanning D8530 User Manual

POWERSCAN® D8530 

 

 
 

 
The PowerScan® D8530 family uses green LED indicators to signal the following 
reader functions: 
 

STATUS 

Power ON 

At power-on, the LEDs blink briefly, 
then  light up for 2 seconds to signal 
the power supply is present. 

Normal Function 

The LED lights up after a good 
decoding and will switch off only at 
the next trigger press. 

 
 

 
The PowerScan® D8530 basic software provides beeper signals for good/wrong 
reading and for indicating errors. Its tone, volume and duration can be directly 
configured by using the codes given in the PowerScan® D8530 Reference Manual 
available on the website. 
 
The application program can also manage the beeper (User Defined Beeper) when 
the reader is controlled by a Host PC. It is possible to activate the beeper by sending 
a command from the Host to the reader via the current communication interface. 
 

 
A green Good-Read Spot will be projected in the field of view when the reading is 
successful.