Graco M10 User Manual

Page of 128
Get Started
10 
nüvifone M10 Owner’s Manual
Replace the Battery Cover
Slide the battery cover onto the back of 
the device until it clicks.
Charge the Battery
Notice
Your nüvifone will not charge if it 
has exceeded the maximum charging 
temperature of 122°F (50°C). If the 
nüvifone is mounted in the windshield, 
remove it from the mount and place it 
somewhere out of direct sunlight.
Charge the battery for at least four 
hours before using the nüvifone for the 
first time. 
1.  Insert the plug into the AC power 
adapter, if necessary.
2.  Plug the USB cable into the AC 
adapter.
3.  Connect the micro-USB end of the 
USB cable to the connector on the 
side of the device.
4.  Plug the AC adapter into a power 
outlet.
If you completely discharge the battery, 
recharge it for at least 20 minutes 
before turning on your nüvifone. 
Alternate Charging Methods
•  (Preferred and fastest method) 
Insert your nüvifone into the cradle, 
and connect the vehicle power 
cable to the cradle. 
•  Connect the vehicle power cable to 
your nüvifone.
•  Connect your nüvifone to a 
computer using the USB cable 
included in the box.
•  Insert the battery into the battery 
charger (accessory). For more 
information about accessories, go to 
.