Nokia RM-320 User Manual

To switch between the two calls, select 

. To

connect an incoming call or a call on hold with an

active call and to disconnect yourself from the calls,

select 

 > 

. To end the active call,

press the end key. To end both calls, select

 > 

. 

Your device supports enhanced voice commands.

Enhanced voice commands are not dependent on

the speaker’s voice, so the user does not record

voice tags in advance. Instead, the device creates a

voice tag for the entries in contacts, and compares

the spoken voice tag to it. The voice recognition in

the device adapts to the main user’s voice to

recognise the voice commands better.
The voice tag for a contact is the name or nickname

that is saved on the contact card. To listen to the

synthesised voice tag, open a contact card, and

select 

 > 

.

Note:  Using voice tags may be difficult in a

noisy environment or during an emergency, so you

should not rely solely upon voice dialing in all

circumstances.
When you use voice dialling, the loudspeaker is in

use. Hold the device at a short distance away when

you say the voice tag.

1.

To start voice dialling, in the standby mode,

press and hold the right selection key. If a

compatible headset with the headset key is

attached, press and hold the headset key to start

voice dialling.

2.

A short tone is played, and 

 is

displayed. Say clearly the name or nickname that

is saved on the contact card.

3.

The device plays a synthesised voice tag for the

recognised contact in the selected device

language, and displays the name and number.

After a timeout of 2.5 seconds, the device dials

the number. If the recognised contact was not

correct, select 

 to view a list of other

matches or 

 to cancel voice dialling.

If several numbers are saved under the name, the

device selects the default number if it has been set.

Otherwise the device selects the first available

number in a contact card.