Precor EFX532i User Manual

 

 

When the equipment is shipped from the factory, the safety code 
protection feature is disabled. If you enable the safety code, your 
patrons will need to enter four number keys in sequence to begin 
their exercise session and, on the treadmill, start the running belt. If 
the correct keys are not pressed within two minutes, further access 
is denied. For more information, refer to Entering the Safety Code. 

1.  At the 

 prompt, press OK. Use the navigational 

arrow keys to alternate between the two selections. 

E N A B L E D   Causes the safety code prompt to appear prior to 

a workout and when returning from pause mode. 

D I S A B L E D   Does not require a safety code to operate. 

2. 

1. 

2. 

When you are ready, press OK to accept the displayed setting 
and move to the next feature. For further options, refer to the 
table in Accessing Club Programming Mode and Changing the 
Settings. 

 

The equipment can display user prompts, text, and user entries in 
several different languages. When the equipment is shipped from 
the factory, it is set to display English. 

Note: Programming prompts are not affected by language 
selection. The prompts in this section continue to appear in 
English. 

At the 

 prompt, press OK. Use the 

navigational arrow keys to choose a language. 

When you are ready, press OK to accept the displayed setting 
and move to the next feature. For other options, refer to the table 
in Accessing Club Programming Mode and Changing the 
Settings. 

19