Agilent Technologies E6380-90073 User Manual
Chapter 1
215
GPIB Command Dictionary
MEASure subsystem
:AFRequency:FM <meas cmnd>
:AFRequency:FM?
:AFRequency:FM?
These commands set/query the FM deviation measurement. This
measurement is active when FM Mod or FM Demod is selected by using
the AFAN:INP command (see page 59) and SNR is not selected by the
MEAS:AFR:SEL command (see page 216).
measurement is active when FM Mod or FM Demod is selected by using
the AFAN:INP command (see page 59) and SNR is not selected by the
MEAS:AFR:SEL command (see page 216).
Syntax
MEAS:AFR:FM <meas cmd>
MEAS:AFR:FM? !returns real value
Example
MEAS:AFR:FM:AVERage:RESet !resets the number of averages
MEAS:AFR:FM?
!returns the measured value
Screen/field equivalent
MEAS:AFR:FM? reads the
FM Deviation
measurement field on the AF
ANALYZER screen when the
AF Anl In
field is set to
FM Mod
, or
FM
Demod
. This measurement is also displayed on the RF GENERATOR
and RF ANALYZER screens.
:AFRequency:FREQuency <meas cmnd>
:AFRequency:FREQuency?
:AFRequency:FREQuency?
These commands set/query the audio frequency measurement. This
measurement is active when AF Freq is selected by using the
MEAS:AFR:SEL ‘AF Freq’ command (see page 216).
measurement is active when AF Freq is selected by using the
MEAS:AFR:SEL ‘AF Freq’ command (see page 216).
Syntax
MEAS:AFR:FREQ <meas cmd>
MEAS:AFR:FREQ? !returns real value
Example
MEAS:AFR:SEL ‘AF Freq’ !selects the measurement
MEAS:AFR:FREQ?
!returns the measurement’s value
Screen/field equivalent
MEAS:AFR:FREQ? reads the
AF Freq
measurement field on the AF
ANALYZER screen. This measurement is also displayed on the RF
GENERATOR and RF ANALYZER screens.
GENERATOR and RF ANALYZER screens.