American Standard 6067.121.002 User Manual

L201

© 2012 AS America Inc.

             4/12

❑

 

Includes UL-approved Hard-Wired AC transformer 
(electrical box by others). 11-1/2" rough-in
 

❑

 

Includes 10' extension cable. One transformer (sold 
separately) can operate up to 15 faucets and/or 
flush valves. 11-1/2" rough-in

OPERATING PRESSURE:
Overall Range: 20-125 psi**
Recommended: 25 psi (flowing)-80 psi (static)

FLOW REQUIREMENT:
25gpm (94.6 L/min.)
** Water pressure over 80 psi is not recommended 
for most plumbing fixtures.

ACCESSORIES:
• Cast wall flanges (1" & 1-1/2")
• Solid ring pipe supports (2-1/2" & 6" C-E)
• Split ring pipe supports (2-1/2" & 6" C-E)

Exposed, Hardwired AC Powered, Sensor Operated 

Selectronic™ Water Closet Flush Valve for

floor-mounted or wall-hung 1-1/2" top spud bowls.  
Inlet includes 1" I.P.S. angle stop with back-flow

protection, vandal-resistant cap, sweat solder kit,

cover tube and wall flange.
Outlet includes 1-1/2" vacuum breaker, spud coupling

and flange.

•  Light flush (1.1 gpf: 30% water savings) if user is in detec-   

  tion zone for 60 seconds or less

•  Standard flush (1.28 gpf 20% water savings) if user is in

  detection zone for more than 60 seconds

•  Electronic flush valve with Selectronic™ proximity system

  for “Hands Free” operation

•  Includes UL approved hardwired AC transformer

•  Input Voltage: 100 - 250 VAC, 50 / 60 Hz.  Output Voltage:

  6 VDC.

•  Self-Cleaning Piston operation with integral wiper spring

  prevents clogging and reduces maintenance

•  Piston operation delivers superior flush accuracy and

  repeatability

•  Adjustable tailpiece

•  Chemical resistant EPDM seals are unaffected by

  chloramines and ammonia

•  Valve remains closed and does not need to be reset after

  loss of power or water pressure

•  Fully Mechanical Manual Override Button can flush toilet

  during a power outage

•  Vandal-resistant metal cover plate (for 2-gang electric box  

   supplied by others) with no visible fasteners

•  Sensor & electronic controls are fully enclosed and water

  resistant

•  Range can be adjusted manually or by remote control

•  Sanitary Flush - Valve automatically flushes after 24

  hours of non-use to clean fixture & maintain trap seal

•  No external volume adjustment

•  5 second Arming Delay prevents unintentional flushing

•  3-second Flush Delay

•  Can be installed left or right-handed

SUPPLY

DN 25mm

(1" I.P.S.)

115mm - 134mm

(4-1/2" - 5-1/4")

FINISHED WALL

FINISHED

FLOOR

57mm (2-1/4")-

137mm (5-3/8")

409mm

(16-1/8")

293mm

(11-1/2")

SEE ROUGH-IN

ON BACK

CRITICAL

LEVEL

COVER &

ELECTRICAL

BOX

160mm

(6-1/4")

86mm

(3-3/8")

Electronic proximity infrared sensor activated toilet flush valve shall feature self-cleaning piston valve. Includes a UL listed hardwired power 

supply that provides 6 VDC power to run system. Flush volume is determined by amount of time user is in detection zone. 60 seconds or less: 

1.1 gpf/4.2 Lpf.  More than 60 seconds: 1.28 gpf/4.9 Lpf. Includes a fully mechanical manual over-ride that can provide a complete flush without 

power.

 

Includes cast brass valve body and metal cover with chrome finish and vandal resistant stop cap. Angle stop with back-flow protection 

and vacuum breaker included. Flush valve shall be American Standard Model # 606_.721.002.