3M 2250M-iD User Manual
6
78-8130-6150-0 Rev G
1. Safety Information
Please read, understand and follow all safety information contained in these instructions
prior to the use of the 3M
™
Dynatel
™
Cable/Pipe/Fault Advanced M-Series Locator.
Retain these instructions for future reference.
A. Intended Use
The 3M Dynatel Cable/Pipe/Fault Advanced M-Series Locator is used to identify the
placement of underground utility lines. The system must be installed as specified in
the 3M Dynatel Cable/Pipe/Fault Advanced Locator 2250M/2273M Series Operator
Manual. It has not been evaluated for other uses or locations. If this equipment is used
in a manner not specified by 3M, the protections provided by the equipment may be
impaired.
Explanation of Signal Word Consequences
! Warning: Indicates hazardous situation which if not avoided, could result in
death or serious injury.
! Caution: Indicates hazardous situation which if not avoided, could result in
minor or moderate injury.
Explanation of Product Safety Label Symbols
Do not throw away in normal trash.
F
Warning: Risk of electric shock
! WARNING
This WARNING applies to the following 3M Dyna-Couplers;
• 3" (75 mm) - Part number 3001
• 4.5" (114 mm) - Part number 4001
• 6" (150 mm) - Part number 1196
• All accessory kits containing any of the listed Dyna-Couplers - Part numbers 3019, 4519,
• 3" (75 mm) - Part number 3001
• 4.5" (114 mm) - Part number 4001
• 6" (150 mm) - Part number 1196
• All accessory kits containing any of the listed Dyna-Couplers - Part numbers 3019, 4519,
1196/C
A potential for electrical shock exists when using the Dyna-Coupler on cables energized with
electrical power. Use appropriate safety procedures.
DO NOT USE ON CABLES CARRYING IN EXCESS OF 600 VOLTS RMS.
DO NOT USE ON CABLES CARRYING IN EXCESS OF 600 VOLTS RMS.