3M 2273M User Manual

78-8130-6150-0 Rev G

Step 8. After writing to the 3M

™

iD Marker is

completed, the following screen will be displayed.

The following messages may appear in the

writing process.

− Message 1. If the overwrite option was set

to "No" And there was data present on the

target market then the following screen will

be displayed;

− Message 2. When writing to a passive

marker or the wrong frequency then the

following will be displayed.

− Message 3. This screen indicates that X-Type

marker option was incorrectly set to "Yes"

or "No". Verify the serial number that is

displayed on the marker ends with an “X” to

select "Yes" for X-Type, else select "No".

Note: Once the marker data has been locked, the information contained on the marker

is PERMANENT. Choosing to permanently lock the marker data is irreversible. Once

the data is locked it can not be overwritten. Assure that the data that is being written is

correct before proceeding.

A. Modifying Marker Data to be Written

To alter the information to be written into the marker
Press Menu [6] + Write Mode [SK:1]

Step 1. Select a template from the list on the display

to be written into the marker by pressing

the up/down arrows [SK] to highlight the

preferred template. ‘Last Written/Read’ is

the most recent data that was written to/read

from a marker by the receiver.