Sony RHT-G11 User Manual

Enjoying multiplex broadcast
sound (DUAL MONO)

You can enjoy multiplex broadcast sound when
the stand receives an AC-3 multiplex broadcast
signal.

• To receive an AC-3 signal, you need to connect a

digital satellite tuner to the stand with an optical cable
or coaxial cable, and set the digital output mode of the
digital satellite tuner to AC-3.

Select “AUDIO” in the AMP menu, then
press

Select “DUAL MONO,” then press

Select the setting.

• MAIN:

Plays back only the main
channel.

• SUB:

Plays back only the sub
channel.

• MAIN/SUB: Main sound is output from

the left speaker and sub
sound is output from the
right speaker.

Enjoying the sound at low
volume (NIGHT MODE)

You can enjoy sound effects and hear the dialog
clearly even at a low volume level using this
function.

Select “AUDIO” in the AMP menu, then
press

Select “NIGHT MODE,” then press

Select the setting.

• ON: Turns on the “NIGHT MODE”

function.

• OFF: Turns off the function.

• You can listen to Dolby Digital sound at low volume

by using AUDIO DRC (page 29).

Setting the sound from the
satellite tuner (INPUT MODE)

When multi-channel sound does not output, even
if you connect the stand and the satellite tuner via
HDMI cable, connect the digital optical cable.

Select “AUDIO” in the AMP menu, then
press

Select “INPUT MODE,” then press

Select “OPT.”

• AUTO: Preferentially output the sound

signal from the HDMI SAT/
CATV input jack.

• OPT:

Output the signal from the SAT/
CATV OPT jack.

Changing the brightness of
the front panel display
(DIMMER)

The brightness of the front panel display can be
set to one of 2 levels.

Select “SYSTEM” in the AMP menu,
then press

Select “DIMMER,” then press

Select the setting.

• ON: Dim.
• OFF: Bright.

Note

Tip