Philips AZ1201 User Manual

10

1 Set the POWER control to CD.

2 Press / OPEN to open the CD compartment.

3 Insert an audio CD (printed side up) and close the CD

compartment.
™ The CD player starts and scans the contents list of the CD. 

Then, the CD player stops. Display indication: the total
number of tracks.

4 Press the PLAY·PAUSE 2; button to start CD play.

™ Display indication: the current track number.

5 Press the STOP 9 button to stop CD play.

™ Display indication: the total number of tracks.

You can interrupt CD play by pressing PLAY·PAUSE 2;. Continue
CD play by pressing the button again.

™ Display indication: the current track number flashes.

Note: CD play will also stop if:

– you open the CD compartment,
– the end of the CD is reached, or
– you move the POWER control to TUNER or TAPE.

If you make a mistake when operating the CD player, or if the 
CD player cannot read the CD, the display shows 

E or no. (See

”TROUBLESHOOTING”.)

If you press PLAY·PAUSE 2; and there is no CD inserted, the 
display shows no.

All redundant packing material has been omitted. We have tried to make the packaging easy to
separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags,
protective foam sheet).

Your set consists of materials which can be recycled if disassembled by a specialized company.
Please observe the local regulations regarding the disposal of packing materials, dead batteries
and old equipment.