Philips ACT 7585 User Manual
English
POWER SUPPLY
8
You can use the following batteries with this CD-player:
• normal batteries type LR6, UM3 or AA (preferably Philips), or
• alkaline batteries type LR6, UM3 or AA (preferably Philips).
• normal batteries type LR6, UM3 or AA (preferably Philips), or
• alkaline batteries type LR6, UM3 or AA (preferably Philips).
Note: – Old and new or different types of batteries should not be used in
combination. Remove batteries if they are empty or if the player is
not going to be used for a long time.
not going to be used for a long time.
Inserting batteries
1 Unfasten the buckle.
2 Open the CD lid.
3 Open the battery compartment and insert either
1 Unfasten the buckle.
2 Open the CD lid.
3 Open the battery compartment and insert either
2 alkaline batteries, or the rechargeable NiMH
battery AY 3362 (if supplied).
battery AY 3362 (if supplied).
Batteries contain chemical substances, so they
should be disposed of properly.
should be disposed of properly.
Battery indication
The approximate power level of your batteries is shown in the display.
The approximate power level of your batteries is shown in the display.
Battery full
Battery two-thirds full
Battery one-third full
Battery dead or empty. When the batteries are
dead or empty, the symbol
Battery two-thirds full
Battery one-third full
Battery dead or empty. When the batteries are
dead or empty, the symbol
A flashes,
bAtt is displayed, and the beep tone sounds repeatedly.
Average playing time of batteries under normal conditions
Battery type
ESP on
ESP off
Normal
7 hours
6 hours
Alkaline
22 hours
19 hours
Rechargeable ECO-PLUS NiMH battery
10 hours
9 hours
Batteries
(supplied or optionally available)
ACT7585/01 eng 14/2/01 11:04 Page 8