Sangean Electronics RCR-8 User Manual

19

Some radio stations allow you listen to programs that have already

been broadcast. When you select a radio station that has this facility,

the station does not start playing immediately, but instead the display

shows the options ‘Live’ and ‘On demand’.

1. Press the Tuning+/- buttons and it will show ‘Live’ or ‘On Demand’.

2. Press the Select button to select:

    ‘Live’ - plays the current output from the station as normal.

    ‘On Demand’ - lets you listen to previous broadcasts.

    The options will depend on the station you have chosen.

3. When you choose ‘On Demand’, the display shows the names of the

    programs available.

4. Again, use the Tuning+/- and the Select button to select the program

    that you wish to listen.

5. When you have chosen the program you want to listen to, either it will

    start to play, or the display may show a list of days for you to

    choose from, or it may show you a playback start time of 00:00.

    Note that this is not the time that the original broadcast took place.

    It is the time after the start of the program from which the radio will

    start playing. If a start time is displayed, skip to step 7.

6. Use the Tuning+/- and the Select button to select the day the

    program was broadcast. The display will then show a program start

    time of 00:00:00.

7. To listen from the beginning of the program, press the Select

    button again. Alternatively, choose the required start time to start

    the program playing.

Stations which enable you to listen to previously broadcast program

also allow you to fast-forward and rewind to any point within the program.

1. When the display shows 00:00:00 , Press the Fast-Forward or

    the Rewind button on the top panel of the radio to program the

    starting time. It is in 30 second increments.

2. When the required time into the program is reached, press the

    Select button. and the program will resume from that point.

When listening to previously broadcast material, it is possible to

temporarily pause the program if needed.

To pause playback press the Play / Pause button on the remote control.

To resume playback press the Play / Pause button again.