Alliance Laundry Systems TMB795C User Manual

25

M414905

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

Once machine is installed, please be sure to complete 

the following items:

•

Review and verify machine operation with 

customer.

•

Leave all literature and a signed Declaration of 

Conformity with customer.

•

Review machine warranty information with 

customer.

•

Apply warning sticker on front panel of machine, 

in language appropriate to country of sale 

(included in literature packet).

This information is to be used when installing gas 

tumblers in countries and/or on gases different than the 

machine’s factory configuration. Tumblers are 

supplied from the factory for operation on Natural Gas 

1000 Btu/cu ft. (8914 kcal/m

3

), or L.P. Gas 2500 Btu/

cu ft. (22,250 kcal/m

3

),in the countries of GB/IE/PT/

ES/IT/GR/LU/CH. To install machines in any other 

country, or on any other gas, requires some level of 

modification.
Machines are built in two different configurations:

•

Natural Gas – regulated/governor 

•

Liquefied Petroleum (L.P.) Gas – not regulated/

no governor

Machines configured for Natural Gas (regulator/

governor) may be converted to L.P. Gas (not regulated/

no governor) with block-open kit, Part No. M400763. 
Serial plates supplied from the factory are configured 

for GB/IE/PT/ES/IT/GR/LU/CH. These instructions 

pertain to the situations when the country of use or gas 

supply is different than that on the serial plate.
Table 1 describes the different gases that are available 

in different CE countries, and how the machines need 

to be configured to operate with those gases. In the 

CE, there are Natural Gas configurations that do not 

allow for machine regulation and L.P. Gas 

configurations that must be regulated. For L.P. Gas, 

third family B/P at 50 mbar, order Regulated Natural 

Gas machines and convert according to Table 1.

W002