Alliance Laundry Systems Stacked Drying Tumbler User Manual

Page of 38
2
M412060
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
IMPORTANT: Warranty is void unless drying tumbler is installed according to instructions in this manual. 
Compliance with minimum specifications and requirements detailed herein, and with applicable local gas 
fitting regulations, municipal building codes, water supply regulations, electrical wiring regulations, and any 
other relevant statutory regulations. Because of varied requirements, applicable local codes should be 
thoroughly understood and all pre-installation work arranged for accordingly.
In the U.S.A. installation must conform to the latest edition of the American National Standard Z223.1 “National 
Fuel Gas Code” and Standard ANSI/NFPA 70 “National Electric Code”.
In Canada installation must comply with Standards CAN1-B149.1 or CAN1-B149.2 codes for gas burning 
appliances and equipment and CSA C22.1, latest edition, Canadian Electric Code, Part I. Steam models are not 
certified by the Canadian Gas Association. The 150 lb. models are not certified by the Canadian Gas Association.
In Australia installation must comply with the Australian Gas Association Installation Code for Gas Burning 
Appliances and Equipment. The 150 lb. models are not certified in Australia.
NOTE: The WARNING and IMPORTANT instructions appearing in this manual are not meant to cover all 
possible conditions and situations that may occur. It must be understood that common sense, caution and 
carefulness are factors which CANNOT be built into this tumbler. These factors MUST BE supplied by the 
person(s) installing, maintaining, or operating the tumbler.
Always contact your dealer, distributor, service agent or the manufacturer on any problems or conditions you do 
not understand.
Information For Handy Reference
Date Purchased
 Model No.
 Serial No.
 
Dealer’s Name
NOTICE: For your own convenience and protection, record the above information and retain your sales slip 
for this appliance. The model and serial numbers will be found on the serial plate located at the rear of the 
tumbler. Refer to page 7.
Failure to install, maintain, and/or operate this machine according to manufacturer’s 
instructions may result in conditions which can produce serious injury, death and/or property 
damage.
W644
WARNING
To reduce the risk of fire, electrical shock, serious injury or death to persons, do not operate 
tumbler if it does not perform according to these instructions. Immediately disconnect 
electrical service, shut off gas supply, and contact an authorized service representative. 
Service and repairs are to be performed by authorized service representatives only.
W645
WARNING