Alliance Laundry Systems 602004144 User Manual
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Maintenance
25
70400101 (EN)
Bi-Annually Maintenance
Annual Maintenance
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the tumble dryer before servicing.
• Close gas shut-off valve to gas tumble dryer before servicing.
• Close steam valve to steam tumble dryer before servicing.
• Never start the tumble dryer with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the tumble dryer is properly grounded.
W002R1
WARNING
Check mounting hardware for any
loose nuts, bolts or screws.
loose nuts, bolts or screws.
Check gas connections for leakage.
Check for loose electrical connections.
Check steam connections for looseness
and leakage.
and leakage.
Remove all front panels and vacuum,
including coin drop mechanisms.
including coin drop mechanisms.
Check cylinder and front panel seals.
Inspect cabinet and inner panels for
any damage, replace or repair as needed.
any damage, replace or repair as needed.
Clean burner tubes and orifice area of
any lint buildup.
any lint buildup.
Remove cylinder. Use a vacuum to
clean lint from area around rear seal
and idler assembly. Check seal and
idler assembly for wear.
clean lint from area around rear seal
and idler assembly. Check seal and
idler assembly for wear.
Remove burner tubes and clean using
water and a brush.
water and a brush.