Alliance Laundry Systems 512685R2 User Manual
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Installation
512685
8
Before You Start
Tools
For most installations, the basic tools you will need
are:
are:
Figure 1
NOTE: An 8 in. (20.32 cm) coin drawer is required
for coin operated MDC and NetMaster models.
for coin operated MDC and NetMaster models.
Additional Security
Torx security screws are available (as optional
equipment at extra cost) for securing both lower access
panels to each dryer base. Order Part No. 62853.
equipment at extra cost) for securing both lower access
panels to each dryer base. Order Part No. 62853.
A Torx bit, Part No. 282P4, is available (as optional
equipment at extra cost) for installing the Torx security
screws.
equipment at extra cost) for installing the Torx security
screws.
A Torx bit holder, Part No. 24161, is available (as
optional equipment at extra cost) to be used with the
Torx bit.
optional equipment at extra cost) to be used with the
Torx bit.
D818I
1
Wrench
2
Screwdrivers
3
Level
4
Teflon Tape
5
Duct Tape
1
2
3
4
5
Any disassembly requiring the use of
tools must be performed by a suitably
qualified service person.
tools must be performed by a suitably
qualified service person.
W299
WARNING