Alliance Laundry Systems 512685R2 User Manual

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

31

512685

1. Remove slide extension parts from parts 

accessories bag included in unit.

2. If installing a Greenwald coin slide, position 

extension lever (to be installed on extension 
bracket) with arm that has one star facing down. 
Refer to Figure 35.

3. If installing a Monarch or ESD coin slide, 

position lever with arm that has two stars facing 
down. Refer to Figure 35.

4. Install extension lever with rounded corner facing 

away from extension bracket using bolt, one or 
two flat washers (shims) (use number of washers 
included in kit) and nut. Refer to Figure 36. 
Make sure washers are flat against bracket.

5. Torque nut between 2 and 2.26 Nm (18 and 20 

inch-pounds), or tighten nut firmly.

6. Install extension spring in bracket hole and hole 

in upper arm of lever. Refer to Figure 36.

7. Bend loops closed after installation.

8. Check to make sure the lever swings freely.

1. Install slide extension onto top of coin slide using 

two remaining screws and lockwashers. Refer to 
Figure 37.

2. Insert coins and partially extend coin slide.

3. Insert coin slide on its side through meter case 

opening. Then rotate 90 degrees to its proper 
orientation.

4. Return coin slide and hook slide pins onto meter 

case. 

5. Continue coin slide installation according to 

manufacturer’s instructions.

TLW2088N

Figure 35 

TL2089N

Figure 36 

TLW2089N

TLW1564K

Figure 37