Alliance Laundry Systems 512685R2 User Manual

Operation

512685

Step 4: Determine Proper Dryer

The direction of the arrow indicates which dryer is
being used.

Step 5: Set Fabric Selector

Select NORMAL for cottons, PERM PRESS/
CASUAL for permanent press, DELICATE for
sensitive items or FLUFF (NO HEAT) for items that
require no heat.

NOTE: Always follow manufacturer’s care label
instructions.

Figure 43

Step 6: Start Dryer

Nonmetered Models

Rotate timer knob to desired time setting (up to
60 minutes). Press the PUSH-TO-START button.
IN USE light will come on (indicating start of cycle).

Figure 44

Coin Slide Models

Place coin(s) in slide and carefully push in as far as
possible and then pull slide out as far as possible. After
IN USE light comes on (indicating start of cycle),
press the PUSH-TO-START button.

Remove knits when slightly damp because overdyring
may cause shrinkage. Do not tumble dry knit woolens.

Should dryer stop before cycle is completed, the motor
overload protector may have cycled. Refer to
Maintenance section.

NOTE: This machine includes an extended tumble
feature. Starting 20 minutes after a cycle ends, the
cylinder will tumble for two minutes every hour
without heat, up to 18 hours or until door is
opened.

DRY2224N

Figure 42

DRY2185N

NO HEAT

NORMAL

PERM PRESS

CASUAL

FABRIC SELECTOR

DELICATE

DRY2101N

W363I

Figure 45

NONMETERED MODELS

D363I

METERED MODELS