Alliance Laundry Systems LGS19A User Manual

504607

9

Close the loading door and start the dryer in a heat 
setting (refer to the Operating Instructions supplied 
with the dryer). After the dryer has operated for three 

minutes, the exhaust air or exhaust pipe should be 
warm.

To view the burner flame, remove the lower front panel 
of the dryer.

Close the loading door, start the dryer in a heat setting 
(refer to the Operating Instructions supplied with the 
dryer); the dryer will start, the igniter will glow red and 
the main burner will ignite. 

After the dryer has operated for approximately five 
minutes, observe burner flame through lower front 
panel. Adjust the air shutter to obtain a soft, uniform 
blue flame. (A lazy, yellow tipped flame indicates lack 
of air. A harsh, roaring, very blue flame indicates too 
much air.) Adjust the air shutter as follows:

a. Loosen the air shutter lockscrew.

b. Turn the air shutter to the left to get a luminous 

yellow-tipped flame, then turn it back slowly to the 
right to obtain a steady, soft blue flame.

c. After the air shutter is adjusted for proper flame, 

tighten the air shutter lockscrew securely.

d. Reinstall the lower front panel.

After the dryer has operated for approximately three 
minutes, exhaust air or exhaust pipe should be warm.

W046

D316IE3A