Alliance Laundry Systems D715I User Manual

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

510963

8

For most installations, the basic tools you will need are:

Figure 1 

Use rigid metal duct and exhaust the dryer to the 
outside by the shortest route possible.

Figure 2 

NOTE: For more detailed information, refer to 
Section on Dryer Exhaust Requirements.

●

ELECTRIC DRYER
Dryer needs a 3 or 4 wire 120/240 or 
120/208 Volt, 30 Amp, 60 Hertz, 1 phase 
electrical supply.

●

GAS DRYER
Dryer needs a 120 Volt, 15 Amp, 60 Hertz, 
polarized 3-slot effectively grounded receptacle.

NOTE:  For more detailed information, refer to 
Section on Electrical Requirements.

If the supply cord is damaged, it must be replaced by a 
special cord or assembly available from the 
manufacturer or its service agent and is to be replaced 
by a qualified service person.

Dryer is equipped for Natural Gas with a 3/8 inch NPT 
gas supply connection. For more detailed information, 
refer to Section on Gas Requirements.

Place the dryer on a solid floor with an adequate air 
supply. For more detailed information, refer to Section 
on Location Requirements.

D818I

Wrench

Screwdrivers

Level

Teflon Tape

Duct Tape

D314I

W299