Alliance Laundry Systems TMB1276C User Manual

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

18

70444801

The front-end control allows the user to control 
machine operation and programming by pressing 
keypads to select options on the display menus and by 
navigating between display menus.

The user can navigate the control in the following

The

,

,

and

keypads are used to 

select the desired menu. Once the menu is selected, the 

keypad is used to enter that menu. The

 

keypad allows the user to return to the previous menu.

ways.

In Screen to Screen Navigation, the

or

 

keypad are used to go from one menu page to the next 
(i.e., moving from Alarms [1 of 3] Menu to Alarms 
[2 of 3] or Alarms [3 of 3] menus), if a menu cannot fit 
entirely on the same page. The Laundry Management 
Menu uses this navigation method. Cycle 
programming also uses this method.

Another type of menu is a menu with modifiable 

parameters. The

and

keypads are used to 

navigate through the screens. The

and

 

keypads are used to change the valve of the 
highlighted item.

An example is the Temperature Menu under Global 
Setup. The menu items are positioned vertically, but 

the

and

keypads are used to navigate 

through the different items while the

and

 

keypads are used to adjust the values.

This Edit Mode is used when a cycle name must be 
modified or a banner created. The highlighted box is 

moved over the editable item and the

keypad is 

pressed. The mode can be verified by seeing the first 
character in the item with a blinking underscore 
underneath. The character can then be changed by 

using the

and

keypads. To enter a space or 

delete a character, press the

keypad.

The Cycle Name can contain the capital letters “A” 
through “Z”, small letters “a” through “z”, the 
numbers “0” through “9”, and special characters. The 
user can go forward to the next character in the item 

by using the

keypad. Press the

keypad to 

go backward a character. If the first character in the 

item is selected and the

keypad is pressed, the 

cursor will go to the last character of the item. Thus, 
the cursor will move only within the item when the 
horizontal keypads are pressed.

Press the

or

keypad to exit the Edit Mode.