Beko DRVS 73S User Manual

Important safety information

This section includes safety information

that will help protection from risks of

personal injuries or materialistic damages.

Failure to follow these instructions

shall cause any warranty and reliability

commitment to become void.

General safety

• Never place the machine on a carpet-

covered floor, otherwise, lack of airflow

beneath the machine may cause

electrical parts to overheat. This will

cause problems with your machine.

• If the power cable or mains plug is

damaged, you must call Authorised

Service Agent for repair.

• The product should not be plugged

in during installation, maintenance

and repair works. Such works should

always be made by the technical

service. Manufacturer shall not be held

responsible for damages arising from

processes carried out by unauthorised

persons.

• Connect the product to a grounded

outlet protected by a fuse of suitable

capacity as stated in the technical

specifications table.

• Operate your product at temperatures

between +5°C and +35°C.

• Do not use electrical devices in the

product.

• Do not connect the air exit of the

product to the chimney holes which

are used for the exhaust fumes of the

devices operating with gas or other

types of fuel.

• You must provide enough ventilation

in order to prevent gases exiting from

devices operating with other types of

fuels including the naked flame from

accumulating in the room due to the

back fire effect.

• Always clean the lint filter before or

after each loading.

• Never operate your dryer without the

lint filter installed.

• Do not allow fibre, dust and dirt

accumulation around the exhaust exit

and at adjacent areas.

• Power cable plug must be within easy

reach after installation.

• Do not use extension cords, multi-

plugs or adaptors to connect the dryer

to power supply in order to decrease

the risk of electric shock.

• Do not make any changes on the plug

supplied with the product. If it is not

compatible with the socket, have a

qualified electrician change the socket

with a suitable one.

• Items cleaned or washed with gasoil/

fuel oil, dry-laundry solvents and other

combustible or explosive materials as

well as the items that are contaminated

or spotted with such materials should

not be dried in the product since they

emit flammable or explosive vapor.

• Do not dry items cleaned with

industrial chemicals in the dryer.

• Do not dry unwashed items in the

dryer.

• Items soiled with cooking oils,

acetone, alcohol, fuel oil, kerosene,

stain remover, turpentine, paraffin and

paraffin removers must be washed

in hot water with plenty of detergent

before being dried in the dryer.

• Garments or pillows bolstered with

rubber foam (latex foam), shower

bonnets, water resistant textiles,

materials with rubber reinforcement

and rubber foam pads should not be

dried in the dryer.

• Do not use fabric softeners and

anti-static products unless they are

recommended by the manufacturers of

the fabric softener or the product.

• This product must be earthed.

Grounding installation decreases

the risk of electric shock by opening

a path with low resistance for the

electricity flow in case of a malfunction

or failure. Power cable of this product

is equipped with a conductor and

a grounding plug that allows for

grounding the product. This plug must

be installed appropriately and inserted

into a socket which is grounded in

accordance with the local laws and

regulations.

• Do not install the product behind a

door with a lock, sliding door or a door

that has a hinge against the hinge of