Indesit ISL79CS User Manual

If the water container fills the indicator lights,

the heat is turned off and your laundry will not dry.

The 

indicator light      signals that your dryer is

in use or ready to select a programme. If this light flashes
it indicates there is a fault (

).

The 

button     : If the dryer is running and this

button is pressed, the dryer stops. Press again, the
dryer restarts.

The 

lights show you the status of

the programme, or the delay time when they flash. 
During a delayed start the lights will flash to show the
delay selected. When (not flashing) they show each
stage of the programme by the corresponding light
turning on (

).

The 

knob sets the programme: rotate

it until the indicator is pointing to the programme you want
to select (

).

The 

button       starts a selected 

programme. When you press this button there will be
one beep and the progress lights will flash to confirm
the action. If you have not set a programme, the buzzer
will beep four times. When a programme is running,
holding this button in cancels the programme and stops
the dryer (

).

The 

buttons/lights select available options for

your selected programme (

). The lights indicate that the option has

been selected.

The 

allows you to consult a user

friendly table of the available programmes.

The 

light       signals that the water 

container should be emptied. When it is flashing it
indicates that the container is full. 
The light will take a few seconds to go out after
replacing the empty container, the dryer must be 
running for this to happen (

).

Light

Knob

Button

Indicator

Buttons and lights

Lights

Light

Button

Water container

Air intake
grille

Rating plate

Filter

Model &
Serial
numbers

Condenser cover handle

(Pull to open)

Condenser cover

Press and release the front

panel in position shown

Condenser unit

(Cover open)