ARRI 416 User Manual

•  Change to the mode which shows the total exposed 

film counter (“MODE” button).

•  The total exposed film counter can be set to zero by 

pressing the “SET” button (for at least 1.5 seconds) 

while in Standby.

•  The take length counter is automatically reset each time 

the camera is started.

•  The Total Exposed Film Counter can only be set in 

Mode 1 (see Setting the Film Counter Configuration 

above).

•  Use the “SEL“ button to select the total exposed film 

counter digit you wish to change, which will start to 

flash.

•  Use the “SET“ button to change the value of the 

flashing digit.

•  Change from Mode 1 to Mode 3 by pressing the 

“MODE” button twice.

•  Press the “SEL” button once; the symbol m/ft blinks.

•  Press the “SET” button within three seconds to change 

the unit of measurement.

•  Press and hold the “PHASE” button while in Standby. 

The set angle of the mirror shutter appears in the upper 

display line. 

The camera runs at inching speed.

Setting the shutter angle: see Chapter 7.