JVC GZ-MG70AS User Manual

Page of 100
20 
EN
GETTING STARTED
MasterPage: Body_Left
You can format (initialise) the built-in hard disk 
(HDD) or SD cards. You have to format the 
newly-purchased SD cards with this camera 
before using them. This enables stable speeds 
and operation when accessing the recording 
medium. Be aware that all files and data 
including protected files will be erased. 
(
1
Set the power switch to 
 or 
.
2
Press MENU. The menu screen appears.
3
Press 
/
 to select 
[REC MEDIA SETTING], 
then press 49.
4
Press 
/
 to select 
[FORMAT], then press 
49.
5
Press 
/
 to select 
[HDD] or [SD], then 
press 49.
6
Press 
/
 to select [EXECUTE], then 
press 49.
● To cancel the formatting, select [CANCEL], then 
press 49.
To make it more 
difficult to recover the 
data on the hard disk
Even if you format the 
hard disk or erase the 
data on the hard disk, 
sometimes the erased 
data can be recovered by using data recovery 
software etc. that are commercially available.
By pressing the 49 button while selecting 
[HDD] and holding down the 
 button in step 
you can erase the data on the hard disk in a 
format that is difficult to recover. Moreover, by 
repeating this procedure, you can make the data 
even more difficult to recover.
● When formatting in this way, a formatting progress 
bar is displayed.
● If the formatting progress bar does not appear, 
select [CANCEL] and try again from step 
.
CAUTION:
Do not remove the SD card or perform any other 
operation (such as turning off the power) during 
format. Also, be sure to use the provided AC 
adapter, as the data on the recording medium may 
be corrupted if the battery becomes exhausted 
during format. If the data on the recording medium 
becomes corrupted, format it again.
NOTE:
Do not format the recording medium on the PC. 
Make sure to format the recording medium on the 
camera.
Formatting a Recording Medium
DIS
CAMERA SETTING
BASIC SETTING
REC MEDIA SETTING
DISPLAY
QUALITY
WIDE MODE
VIDEO MODE
IMAGE MODE
FORMAT
CLEAN UP
COPY/MOVE
M5E6ASIA.book  Page 20  Wednesday, September 28, 2005  7:07 PM