JVC GZ-MG70AS User Manual

Page of 100
24 
EN
VIDEO RECORDING & PLAYBACK
MasterPage: Body_Left
1
Set the power switch to 
.
2
Set the MODE switch to 
.
● The index screen for videos appears. The image 
on the index screen shows the first part of the 
shooting.
● If the power is turned off while video playback is 
paused, the camera memorizes the scene where 
the video was stopped. In this case, the stopped 
scene is displayed when the power is turned back 
on again.
● To switch the medium to be played back, see pages 
3
Press 
/
/
/
 to select the video file 
you want to play back.
4
Press 49 to start playback.
5
To pause playback, press 49 again.
To return to the index screen
Slide the zoom lever to W when playback is 
paused.
To adjust the speaker volume
During playback slide the zoom lever towards T 
to turn up the volume, or towards W to turn down 
the volume.
To turn on/off the date display
Set [DATE/TIME] to [ON], [AUTO] or [OFF]. 
(
To turn on/off the on-screen display
Press INFO/
 repeatedly. 
To check the file information
Press INFO/
 when playback is paused. 
To play back files in the [EXTMOV] folder
If the data cannot be recorded properly, the 
video files are saved to the [EXTMOV] folder. 
(
To play back the files in the [EXTMOV] folder, 
press the recording start/stop button or START/
STOP button on the remote control while the 
index screen is displayed in step 
2, and then 
proceed to step 
3 after [MPG] is displayed.
To return to the index screen, press the 
recording start/stop button or START/STOP 
button on the remote control again.
● The file information and playlist creation functions 
are not available for files in the [EXTMOV] folder.
● When deleting the files in the [EXTMOV] folder, 
perform it on the PC.
To play back files edited on the PC
To use the camera to play back the video files 
(MPEG2 files, with the extension “.mpg”) which 
have been edited on the PC, follow the following 
procedure. First, change the file name to 
“MOV_xxxx.mpg” (xxxx should be a 4-digit 
number). Connect the camera to the PC with the 
USB cable, and open the [EXTMOV] folder. 
Copy the video files (“MOV_xxxx.mpg”) to the 
[EXTMOV] folder. (Refer to the software 
installation and USB connection guide.) Then 
follow the steps in “To play back files in the 
[EXTMOV] folder”.
NOTES:
● The playback picture can be viewed in the LCD 
monitor or on a connected TV. (
● At the junctions between scenes, the image may 
stop momentarily or the sound may be 
interrupted. However, this is not a malfunction.
● The date and counter can be displayed during 
playback. (
● When the camera heats up, the U indicator 
flashes. If the camera continues to heat up, 
playback may be stopped to protect the recording 
medium. In this case, turn off the camera power, 
and then wait until the camera cools down. 
(
● When a cable is connected to the AV connector, 
the sound is not heard from the speaker.
Video Playback
Power Switch
Lock Button
49
Zoom Lever
INFO/
MODE
Speaker
M5E6ASIA.book  Page 24  Wednesday, September 28, 2005  7:07 PM