JVC GR-X5AH User Manual

Page of 64
12 
EN
MasterPage: Left
Attaching the Core Filter
Attach the core filters to the cables. The core 
filter reduces interference.
1
Release the 
stoppers on both 
ends of the core filter. 
2
Run the cable 
through the core 
filter, leaving approx. 3 cm of cable between the 
cable plug and the core filter. 
S-Video/Audio/Video cable 
USB cable, audio extension cable and AC 
adapter’s cord
Wind the cable once around the outside of the 
core filter as shown in the illustration. 
● Wind the cable so that it is not slack.
3
Close the core filter until it clicks shut. 
NOTES:
● Take care not to damage the cable.
● When connecting a cable, attach the end with the 
core filter to the camcorder.
How to Use the Audio Extension Cable
When using optional headphones or external 
microphone, connect to the provided audio 
extension cable (with a core filter attached), then 
connect the audio extension cable to the 
camcorder. The core filter reduces interference. 
* Attach two core filters to the audio extension 
cable for headphones.
LCD Monitor
Pull on the end 
 of the LCD monitor and open 
the LCD monitor fully. It can rotate 270°. 
You can also turn the 
LCD monitor over and 
move it back to the 
camcorder body with its 
monitor facing out.
Stopper
3 cm
Core filter (small)
Wind once.
3 cm
Core filter (large: USB cable, small: 
audio extension cable and AC 
adapter’s cord)
S-Video/Audio/Video 
cable
USB cable, audio 
extension cable and AC 
adapter’s cord
Audio Extension Cable 
(provided)
Core Filter*
Open the cover.
Headphones
To 
To MIC
Microphone
180°
90°
GR-XASIA_07Start.fm  Page 12  Friday, April 15, 2005  10:13 AM