JVC GR-X5AH User Manual
MasterPage: Video_Heading0_Right
EN
23
The full-function remote control unit can operate
this camcorder from a distance as well as the
basic operations (playback, stop, pause, fast-
forward and rewind) of your VCR. It also makes
additional playback functions possible.
(
this camcorder from a distance as well as the
basic operations (playback, stop, pause, fast-
forward and rewind) of your VCR. It also makes
additional playback functions possible.
(
Installing the Battery
The remote control uses
one lithium battery
(CR2025).
one lithium battery
(CR2025).
1
Pull out the battery
holder by pushing the lock
tab.
tab.
2
Insert the battery in the
holder, and be sure to have the “+” mark visible.
3
Slide the holder back in until you hear a click.
Beam Effective Area (indoor use)
When using the remote
control, be sure to point it at
the remote sensor. The
transmitted beam’s
approximate effective
distance for indoor use is 5 m.
Use the remote control in
front of the camcorder facing toward the lens.
control, be sure to point it at
the remote sensor. The
transmitted beam’s
approximate effective
distance for indoor use is 5 m.
Use the remote control in
front of the camcorder facing toward the lens.
NOTE:
The transmitted beam may not be effective or may
cause incorrect operation when the remote sensor
is directly exposed to sunlight or powerful lighting.
cause incorrect operation when the remote sensor
is directly exposed to sunlight or powerful lighting.
Buttons And Functions
A
Infrared beam transmitting window
● Transmits the beam signal.
The following buttons are available only when
the camcorder’s power switch is set to “PLAY”.
the camcorder’s power switch is set to “PLAY”.
B
PAUSE Button
● Pauses the tape (墌 pg. 24)
Up Button (
C
SLOW Rewind Button (
D
REW Button
● Rewind/Reverse shuttle search on a tape
● Displays previous file in a memory card
Left Button (
E
INSERT Button (
F
SHIFT Button (
G
DISPLAY Button (
H
SLOW Forward Button (
I
PLAY Button
● Starts playback of a tape (墌 pg. 20)
● Starts auto playback of images in a memory
card (
J
FF Button
● Forward/Forward shuttle search on a tape
● Displays next file in a memory card (墌 pg. 26)
Right Button (
K
A. DUB Button (
L
STOP Button
● Stops the tape (墌 pg. 20)
● Stops auto playback (墌 pg. 26)
Down Button (
M
EFFECT Button (
N
EFFECT ON/OFF Button (
The following buttons are available when the
camcorder’s power switch is set to “A” or “M”.
camcorder’s power switch is set to “A” or “M”.
o
Zoom (T/W) Buttons
Zoom in/out (
Zoom in/out (
(Also available with the power switch set to
“PLAY”)
“PLAY”)
p
START/STOP Button
Functions the same as the recording start/
stop button on the camcorder.
Functions the same as the recording start/
stop button on the camcorder.
q
S.SHOT Button
Functions the same as SNAPSHOT on the
camcorder.
(Also available with the power switch set to
“PLAY”)
Functions the same as SNAPSHOT on the
camcorder.
(Also available with the power switch set to
“PLAY”)
Playback Using the Remote Control
1
1
2
Lock tab
Remote sensor
GR-XASIA.book Page 23 Tuesday, April 12, 2005 8:52 PM