JVC GR-X5AH User Manual

MasterPage: Left

To print using the DPOF setting
If the printer is compatible with DPOF, you can 
use the DPOF setting. (

Perform steps 

1 – 3 in “Normal Playback of 

Press MENU. The menu screen appears.

Press Up (4/9) or Down (8) to select 

“DIRECT PRINT”, and press SET. A message 
“PLEASE CONNECT PRINTER” appears.

Connect the camcorder to the printer with 

USB cable.

● After a while, the print menu appears.

Press Up (4/9) or 

Down (8) to select “DPOF 
PRINT”, and press SET. 

Press Up (4/9) or 

Down (8) to select 
“PRINT”, and press SET. 
The image is printed.

● To confirm the DPOF setting, select “CHECK 

SETTINGS”, and press SET. You can check 
images and number of prints by pressing 3 or 
5. To return to the previous menu, press Up 
(4/9) or Down (8) to select “RETURN”, and 
press SET.

If the printer is not recognised, or to print again after 
direct printing with a PictBridge Printer, remove the 
USB cable, select “DIRECT PRINT” in the menu 
again, and then reconnect the cable.

You can initialise a memory card any time.
After initialising, all files and data stored in the 
memory card, including those which have been 
protected, are cleared.

Set the VIDEO/MEMORY switch to 

“MEMORY”.

Set the power switch to “PLAY” while 

pressing down the lock button located on the 
switch.

Press MENU. The menu screen appears.

Press Up (4/9) or 

Down (8) to select 
“FORMAT”, and press 
SET. The FORMAT 
screen appears.

Press Up (4/9) or 

Down (8) to select 
“EXECUTE”, and press SET. The memory card 
is initialised.

● When initialization is finished, “NO IMAGES 

STORED” appears.

● To cancel initialization, select “RETURN”.

Do not perform any other operation (such as turning 
off the camcorder) during initialization. Also, be sure 
to use the provided AC adapter, as the memory 
card may be corrupted if the battery becomes 
exhausted during initialization. If the memory card 
becomes corrupted, initialise it.

GR-XASIA.book  Page 32  Tuesday, April 12, 2005  8:52 PM