Epson V12H321005 User Manual
7
Connect the document camera to a projector using the USB cable that is supplied with the
unit.
For information on the projectors that can be connected, see the User's Guide supplied with
the projector.
unit.
For information on the projectors that can be connected, see the User's Guide supplied with
the projector.
A
Extend the foot, and then hold the base and raise the camera head.
vThe document camera will not operate properly
if a USB hub is used. Connect the projector
directly to the unit.
directly to the unit.
vBe careful not to pinch your fingers in the
movable parts of the unit.
vWhen using the document camera, be sure to
extend the foot. Otherwise, the unit may fall,
causing personal injury if it strikes someone.
causing personal injury if it strikes someone.
B
While holding the camera head, raise the camera arm.
Do not release the camera head before the camera
arm is vertical. The camera head may cause
personal injury if it strikes you.
arm is vertical. The camera head may cause
personal injury if it strikes you.
C
Rotate the camera arm 90
° and adjust the height according to the subject matter.
Do not look into the camera lens when the LED
lamp is on.
lamp is on.
Connecting to a Projector to Display Images
Procedure
Caution
Caution
Warning