Fujifilm S2500HD Series User Manual

Page of 140
104
Tr
o
u
b
le
sh
o
o
ti
n
g
Troubleshooting
Power and Battery
Problem
Problem
Possible cause
Possible cause
Solution
Solution
Page
Page
Power 
supply
The camera does 
not turn on.
The batteries are exhausted.
Insert fresh or fully-charged spare batteries.
8
The batteries are not in the correct orienta-
tion.
Re-insert the batteries in the correct orienta-
tion.
8
The battery-chamber cover is not latched.
Latch the battery-chamber cover.
9
The AC adapter and DC coupler are not con-
nected properly.
Make sure that the AC adapter and DC coupler 
are properly connected.
The camera has been left for an extended 
period with no batteries inserted and the 
AC adapter/DC coupler unplugged.
After inserting the batteries or connecting the 
AC adapter/DC coupler, wait a few moments 
before turning the camera on.
The batteries run 
down quickly.
The batteries are cold.
Warm the batteries by placing them in a pocket 
or other warm place and re-insert them in the 
camera immediately before taking a picture.
v
There is dirt on the battery terminals.
Clean the terminals with a soft, dry cloth.
The camera is in 
M mode.
Select another shooting mode. 
35
The batteries are new, have been left unused 
for  an  extended  period,  or  have  been  re-
charged without fi rst being fully discharged 
(rechargeable Ni-MH batteries only).
Discharge Ni-MH batteries using the 
P  DIS-
CHARGE option and recharge them in a bat-
tery charger (sold separately).  If the batteries 
do not hold a charge after repeated discharg-
ing and recharging, they have reached the end 
of their service life and must be replaced.
100
HIGH SPEED SHOOTING is on.
Turn 
HIGH SPEED SHOOTING off   to  re-
duce the drain on the battery.
78
CONTINUOUS AF is selected for F FO-
CUSING
.
Select a diff erent focusing option.
78
The camera turns 
off  suddenly.
The batteries are exhausted.
Insert fresh or fully-charged spare batteries.
8
The AC adapter or DC coupler has been dis-
connected.
Make sure that the AC adapter and DC coupler 
are properly connected.