Fujifilm S2500HD Series User Manual

Page of 140
8
Inserting the Batteries
The camera takes four AA alkaline, lithium, or rechargeable Ni-MH batteries.  A set of four alkaline bat-
teries is supplied with the camera.  Insert the batteries in the camera as described below.
  1
  Open the battery-chamber cover.
Slide the battery-cham-
ber latch in the direction 
shown and open the bat-
tery-chamber cover.
1 Note
Be sure the camera is off  before opening the bat-
tery-chamber cover.
3 Cautions
• Do not open the battery-chamber cover when 
the camera is on.  Failure to observe this pre-
caution could result in damage to image fi les or 
memory cards.
• Do not use excessive force when handling the 
battery-chamber cover.
  2
 Insert the batteries.
Insert the batteries in the 
orientation shown by the 
“+“ and “–“ marks inside 
the battery chamber.
3 Cautions
•  Insert the batteries in the correct orientation.
•  Never use batteries with peel-
ing or damaged casing or mix 
old and new batteries, batter-
ies with diff erent charge levels, 
or batteries of diff erent types
.  
Failure to observe these 
precautions could result 
in the batteries leaking or 
overheating.
•  Never use manganese or Ni-Cd batteries.
•  The capacity of alkaline batteries varies with the 
manufacturer and drops at temperatures below 
10 °C/32 °F; Ni-MH batteries are recommended.
•  Fingerprints and other soil on the battery termi-
nals can shorten battery life.
Battery casing
Battery casing
Battery casing
Battery casing