Fujifilm FinePix S5 Pro User Manual

149

When the camera establishes communication with a GPS 
device, a 

 icon will be displayed in the control panel. 

The exposure meters will not turn off while this icon is 
displayed. Photo information for pictures taken while the 

 icon is displayed will include an additional page 

recording the current latitude, longitude, altitude, and 
Coordinated Universal Time (UTC). If no data is received 
from the GPS unit for two seconds, the 

 icon will clear 

from the display and the camera will stop recording GPS 
information. Also, the auto power save function will not be 
performed while the camera is communicating with a GPS 
device.

• UTC data is provided by the GPS device and is 

independent of the camera clock.

• GPS data is only recorded when the 

 icon is 

displayed. Confirm that the 

 icon is displayed in the 

control panel before shooting. A flashing 

 icon 

indicates that the GPS device is searching for a signal; 
pictures taken while the 

 icon is flashing will not 

include GPS data.

Choose the rate (2 frames/s or 1 frame/s) at which 
pictures can be taken in continuous low-speed mode.

The frame advance rate may drop at slow shutter speeds 
and at [

 D-RANGE] setting other than [100% (STD)].

Select [ON] to delay shutter release until about 0.4 s after 
the shutter button is pressed, reducing camera shake in 
situations in which the least camera movement could 
result in blurred photographs (for example, microscope 
photography).

See p.101 for details.

Normally, select [ON] to playback images quickly in the 
LCD monitor (or [OFF] to playback images slowly). With 
any software application, If you encounter some 
difficulties with playback or printing of images with [ON] 
selected, select [OFF].

How to use the SET UP menu (

➝p.138)