Fujifilm FinePix S5 Pro User Manual

191

Z Hardware and software requirements
To run this software, you must have the hardware and software described below. Check your system before you begin the 
installation.

*

1

PowerPC, Intel processor loaded

*

2

Models with a USB port as a standard feature

*

3

Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet 
connection.

• Connect the camera directly to the Macintosh using the USB cable (mini-B). The software may not operate correctly if you use an 

extension cable or connect the camera via a USB hub.

• Push the USB connector fully into the socket to ensure that it is securely connected. The software may not operate correctly if the 

connection is faulty.

• Additional USB interface board is not guaranteed.

*

1

Power Macintosh G3

*

2

, PowerBook G3

*

2

, 

Power Macintosh G4, iMac, iBook, 
Power Macintosh G4 Cube, PowerBook G4, Power Macintosh G5,
MacBook, MacBook Pro, or Mac mini

Mac OS X (compatible with version 10.3.9 to 10.4.8)

192 MB minimum
Minimum 768 MB when converting CCD-RAW Data

Amount required for installation: 200 MB minimum
Amount required for operation: 400 MB minimum
(When using ImageMixer VCD2 LE for FinePix: 2 GB or better)
Minimum 2 GB when converting CCD-RAW Data (required on the system disk)

800 × 600 pixels or better, at least 32,000 colors
(When using ImageMixer VCD2 LE for FinePix: 1024 × 768 pixels or better)

*

3

• To use the FinePix Internet Service or mail attachment function:

An Internet connection or e-mail transmission software is needed

• Connection speed: 56 k or better recommended

Continued Q