Fujifilm FinePix S5 Pro User Manual

195

• If the camera communicates with the PC successfully, 

 will be displayed in the control panel and viewfinder. 

Photographs can be transferred to the computer as 
described in the manual for the supplied software (on 
CD).

See the manuals provided with the supplied software for 
more information.

• FinePix S5 Pro is compatible with MTP/PTP (Picture 

Transfer Protocol). A MTP/PTP-compatible camera is a 
camera which can recognize the PC and printer 
automatically when connected.

• Always use the FUJIFILM AC Power Adapter AC-

135VN (sold separately). If the camera suddenly loses 
power during data exchange, the memory card could be 
damaged.

• Do not disconnect the USB cable (mini-B) when the 

camera is communicating with a PC. If disconnecting 
the USB cable (mini-B) during communication, the files 
on the memory card may be destroyed.

• In Mac OS X, you must set the automatic setup when 

the first time you connect the camera to your PC.

• Make sure that USB cable (mini-B) is connected 

correctly and pushed in.

• Perform pre-arranged steps to disconnect and turn off 

the camera (

➝p.197).

• Auto power save is disabled during USB connection.
• Before replacing the memory card, always disconnect 

the camera from the PC. See p.197 for information on 
the disconnection procedure.

• The camera and PC may be exchanging data even 

when “Copying” disappears on your PC screen. Before 
disconnecting the USB cable (mini-B), always check 
that the access lamp is off.

• An image taken with CCD-RAW (

➝p.93) setting is 

required to be transferred to a PC using FinePixViewer.

• When Windows 98 SE is used, the supplied software 

must be installed first before connecting the camera to 
a PC using the USB cable. The PC will not recognize 
the camera if it is connected before the installation.

Continued Q