Fujifilm FinePix S5 Pro User Manual

Page of 244
205
Append
ices
F In case of surface clean
RTurn the camera off and attach the lens cap, or if 
the lens is detached, attach a body cap to the camera.
In case of surface soiling 
RContact a FUJIFILM dealer and request CCD 
cleaning. Or see Starting CCD cleaning (
➝p.205).
CAUTION
• Note that this option is not available at battery 
levels less than 
 or while shooting multiple 
exposures.
• When cleaning the camera, always use the full 
charged battery or AC power adapter AC-135VN 
(sold separately) to prevent camera damage 
should the mirror drop or the shutter close.
• If the battery runs low while the mirror is raised, a 
beep will sound and the AF-assist illuminator will 
blink to warn that the shutter curtain will close and 
the mirror will lower in about two minutes. End 
cleaning or inspection immediately.
MEMO
To return to normal operation without raising the 
mirror, turn the camera off.
Starting CCD cleaning
Take great care to avoid scratching or damaging the CCD 
during cleaning, as you will be responsible for the possibly 
high cost of repairs (or replacement) by an authorized 
FUJIFILM dealer.
A Use a blower (without a brush attached) to remove any 
soiling on the CCD surface.
MEMO
Use a blower that does not have a brush attached. 
Using a blower brush to clean soiling from the CCD 
can scratch the CCD surface.
Continued Q
E Hold the camera so that the sun shines on the CCD 
and check the surface for dust.