Samsung L100 User Manual

Page of 102
26
Setting up the recording function using the camera buttons
The recording mode function can be set up by using the camera buttons.
POWER button
Used for turning the camera’s power on / off.
 If there is no operation during the specifi ed 
time, the camera’s power will be turned off 
automatically to save battery life. 
Refer to page 74 for more information 
about the auto power off function.
SHUTTER button
Used for taking an image or recording voice in the RECORDING mode.
 In MOVIE mode
Pressing the shutter button down fully 
starts the process for recording a movie. 
Press the shutter button once and the 
movie is recorded for as long as the 
available recording time in the memory 
allows. If you wish to stop recording, 
press the shutter button again.
In STILL IMAGE mode
 Pressing the shutter button down halfway activates the autofocus and 
checks the condition of the fl ash. Pressing the shutter button down fully 
takes and stores the image. If you select voice memo recording, the 
recording will start after the camera has fi nished storing the image data for 
10 seconds.
x
x
ZOOM W / T button
If the menu is not displayed, this button works as 
the OPTICAL ZOOM or DIGITAL ZOOM button.
This camera has a 3X optical zoom and a 3X 
digital zoom function. 
Using both will offer a total zoom ratio of 9X.
TELE Zoom
Optical zoom TELE :  Pressing the ZOOM T button. This will zoom into the 
subject i.e. the subject will appear nearer.
Digital zoom TELE 
 
 
:  When the maximum (3X) optical zoom is selected, 
pressing the ZOOM T button activates the digital 
zoom software. Releasing ZOOM T button stops 
the digital zooming at the required setting. Once the 
maximum digital zoom (3X) is achieved, pressing the 
ZOOM T button will have no effect.
„
Pressing 
the ZOOM
T button
Pressing 
the ZOOM
T button
[WIDE zoom]
[TELE zoom]
       [Digital zoom 3.0X]