Samsung L100 User Manual

65

[Copy To Card] will not be selected without inserting a memory card.
If there is not enough space available in the memory card to copy 
saved images in the internal memory (10 MB), the [Copy To Card] 
command will copy only some of the images and d  isplay [Memory 
Full!] message. Then the system will return to the playback mode. 
Please be sure to delete any unnecessary fi les to free up space 
before inserting the memory card into the camera.
When you move the images that are stored in the internal memory 
by doing [Copy To Card] to the card, the next number of fi le names 
will be created in the card to avoid duplication of the fi le name. 
-    When the [Reset] of the [File] setup menu is set : The copied fi le 

names start from after the last stored fi le name. 

-    When the [Series] of the [File] setup menu is set : The copied 

fi le names start from after the last captured fi le name. After 
completing [Copy To Card], the last stored image of the last 
copied folder is displayed on the LCD monitor. 

x

x

x

You can use the USB cable to connect this camera to a printer that supports 
PictBridge (sold separately) and print the stored images directly. 
Movies and voice fi les cannot be printed.

 Setting up the camera for connection to 
the printer

1.  Connect the camera and printer with USB 

cable.

2.  

Select the [Printer] menu by pressing Up / 
Down button and press the OK button.

Connecting the Camera to a Printer

„

„

K  If the [USB] menu is set to the [Computer], you cannot connect a 

Pictbridge compatible printer to the camera through USB cable with 
[Connecting Computer] message. In this case, remove the cable and 
do steps 1 and 2 again.

)

Select USB

Computer

Printer

Confirm