Jenoptik 5.0z3 User Manual

12

RECORDING

Press the flash button cycles your camera through the various flash modes.  A symbol appears on the 
LCD screen to indicate the flash mode. The flash cannot be used when movie recording.

1.  Set the camera to the Record mode.

•  The flash function only used in still image shooting.

2. Press the 

 button to change the flash mode: 

 

Auto flash

Flash fires automatically when shooting 
conditions require extra lighting.

 

Red eye reduction

Flash strobes to let the subject’s eyes adjust 
to the flash, then fires again to take the actual 
image.  The digital camera will detect the 
subject brightness and use the flash only when 
required.

Always on

Flash fires every time you take a photo, 
regardless of lighting conditions.

 

S

Slow sync

Flash fires with a slow shutter speed.

Always off

The flash never fires even in dark situation.

3.  Shoot the image.   

Note:
•  The flash charging time may increase when the battery is low.

 

Use the self-timer to set a delay from the time the shutter button is pressed to the time the image is 
shot.  Use the burst to record four continuous still images shooting.

1.  Set the camera to the Record mode .

•  This function only used in still image shooting.

2. Press the

button to change the settings: 

Flash

Flash

Self-timer