Sony MVC-CD400 User Manual
29
S
hoo
ting st
ill
im
ages
Using the self-timer
,
Turn the mode dial to
, and
press
V
(
) on the control
button.
The
(self-timer) indicator appears on the
LCD screen.
•
If the menu is currently displayed, press MENU
first so that the menu disappears.
first so that the menu disappears.
•
You can also carry out this operation when the
mode dial is set to S*, A*, M*, SCN, or
mode dial is set to S*, A*, M*, SCN, or
.
* MVC-CD400 only
,
Center the subject in the frame,
and press the shutter button
fully down.
and press the shutter button
fully down.
The self-timer lamp (page 11) flashes and a
beep sounds after you press the shutter
button until the shutter button is released
(approximately 10 seconds).
beep sounds after you press the shutter
button until the shutter button is released
(approximately 10 seconds).
To cancel the self-timer in the middle
of the operation
of the operation
Press V (
) on the control button again.
•
If you press the shutter button while standing in
front of the camera, the focus and the exposure
may not be correctly set.
front of the camera, the focus and the exposure
may not be correctly set.
1
640
4
60min
2
640
F 5 . 6
3
0EV
5 0
60min
Selecting a flash mode
,
Set the mode dial to
, and
press
v
( ) on the control
button repeatedly to select a
flash mode.
flash mode.
Each time you press v ( ), the indicator
changes as follows.
changes as follows.
No indicator (Auto):
The flash
automatically pops up and strobes when the
surroundings are dark (default).
surroundings are dark (default).
r
(Forced flash):
The flash strobes
regardless of the surrounding brightness.
r
(No flash):
The flash does not strobe.
640
4
60min