Sony SNC-RZ30P User Manual

Ad
minis

tra

ting t

he Camer

a

Setting the Camera Position and Action — Preset position setting Page

25

Type the IP addresses and subnet mask values you want 
to allow or deny access to the camera.
You can specify up to 10 IP addresses and subnet mask 
values.  For a subnet mask, type 8 to 32.
To temporarily cancel the Default Policy for a specified 
IP address/subnet mask, select Allow or Deny from the 
drop-down list on the right.

The subnet mask value represents the bit number from 
the left of the network address.
For example, the subnet mask value for 255.255.255.0 is 
24.
If you set “192.168.0.0/24, Allow,” you can allow access 
from the computers having an IP address between 
192.169.0.0 and 192.168.0.255.

When you click Preset position on the Administrator 
menu, the Preset position setting page appears.
Use this page to store the pan, tilt and zoom positions of 
the camera (Preset position) in memory and program the 
sequenced action of the camera (Tour).

You can store up to 16 setting of the pan, tilt and zoom 
positions (Preset positions) of the camera in memory.

For a Preset position setting, you can store the pan, tilt 
and zoom positions only.  Set the Focus mode, Exposure 
mode and White balance mode menu to Auto. (See 
“Setting the Camera — Camera setting Page” on page 
19.)

Select a preset number 1 to 16 from the drop-down list. 
Click Preset call to move the camera to the pan, tilt and 
zoom positions stored in the selected preset number.

Type a preset position name for the selected preset 
number up to 32 characters.

Use this button to store the camera position in a preset 
number.
To store, proceed as follow:

Display the monitor image on the main viewer 
page, and pan, tilt and zoom the camera to the 
position you want to store as a Preset position.

Select the Preset No. from the drop-down list and 
enter the Preset position name.

Click Apply.
The camera position is stored in memory.