Sony SNC-RZ30P User Manual

Ot
he
rs

Using the Supplied Setup Program

43

To specify the DNS server addresses manually:
Select Use the following DNS server address, and 
type the Primary DNS server address and 
Secondary DNS server address in each box.

The Third DNS server address and Fourth DNS 
server address are invalid for this camera.

Type the Administrator name and Administrator 
password.
The default settings of both items are “admin.” 

Confirm that all items are correctly set, then click 
OK.
If “Setting OK” is displayed, the IP address is 
correctly assigned.

Click the Bandwidth control tab to display the 
bandwidth setting window.
The current bandwidth is displayed in Current 
bandwidth.

Click to select the desired bandwidth from the 
Setting bandwidth list box.

Type the Administrator name and Administrator 
password in each box.

Click OK.
If "Setting OK" is displayed, the bandwidth setting 
is completed.

You can set the date and time on the camera.

Click the Date time tab to display the date/time 
setting window.

Click to select the camera you want to set the date 
and time for.
You can select multiple cameras and set the date 
and time simultaneously.

Select the date/time format from the Date time 
format drop-down list.

Select the area where the camera is installed from 
the Time zone selecting drop-down list.

Set the date and time.
You can set the date and time in two ways.

Set the current date and time on the Manual current 
date time setting boxes, and click OK.  The setting