Sony DFR-C3000 User Manual
7(E)
Rear view
Rear view of the DFR-E3000
1
CAMERA OUT connector
2
REFERENCE connectors and 75
Ω
termination switch
3
VIDEO SYNC OUT connector
4
CAMERA SYNC connector
5
PC I/F (IEEE 1284) connector
6
CAMERA IN connector
7
DFP-D3000 I/F connector
8
REMOTE I/O connector
9
AC IN connector
q;
U
(ground) connector
qa
SDIF-2 IN connector
qs
ANALOG OUT connector
qd
WORD SYNC connector
qf
ANALOG IN connector
qg
TIME CODE connector
qh
AES/EBU IN connector
1
CAMERA OUT connector
Connect to the DFR-C3000 for recording.
2
REFERENCE connectors and 75
Ω
termination
switch
Input video reference signal. Set the 75
Input video reference signal. Set the 75
Ω
termination
switch to OFF if you are using a loop-through
connection; set it to ON if you are not using a loop-
through connection.
connection; set it to ON if you are not using a loop-
through connection.
3
VIDEO SYNC OUT connector
Outputs sync signal to external equipment. The type
of the output sync signal can be selected using the
computer connected to the PC I/F connector (NTSC,
MONO, or PAL). For details, contact your nearest
Sony dealer or service personnel.
of the output sync signal can be selected using the
computer connected to the PC I/F connector (NTSC,
MONO, or PAL). For details, contact your nearest
Sony dealer or service personnel.
4
CAMERA SYNC connector
Connect to the Westrex Camera System to output sync
signal. For details, contact your nearest Sony dealer or
service personnel.
signal. For details, contact your nearest Sony dealer or
service personnel.
5
PC I/F (IEEE 1284) connector
Connect to the IBM PC or compatible personal
computer for controlling the system. For details,
contact your nearest Sony dealer or service personnel.
computer for controlling the system. For details,
contact your nearest Sony dealer or service personnel.
6
CAMERA IN connector
Connect to the DFR-C3000 to input the sync signal.
7
DFP-D3000 I/F connector
Connect to the DFP-D3000 for monitoring the
recording.
recording.
U
-
AC IN