Sony P50 Manual
Ad
di
di
tiona
l inf
o
rm
atio
n
79
Your personal computer
does not recognize your
camera.
does not recognize your
camera.
• The battery level is low.
t Use the AC power adaptor (not supplied)
• The camera is turned off.
t Turn on the camera.
• The USB cable is not connected firmly.
t Disconnect the USB cable, and connect it again
• The USB connectors on your personal computer are
connected to other equipment besides the keyboard,
the mouse, and your camera.
t Disconnect the USB cables except for the ones
the mouse, and your camera.
t Disconnect the USB cables except for the ones
connected to the keyboard, the mouse, and your
camera.
camera.
• The USB driver is not installed.
t Install the USB driver (page 32).
• [USB CONNECT] is set to [PTP] in the setup
settings.
t Set it to [NORMAL] (page 70).
t Set it to [NORMAL] (page 70).
• Since the camera is connected to a computer with
the USB cable before installing the USB driver, the
drive is not recognized by the computer.
t Delete the drive which is not recognized, then
drive is not recognized by the computer.
t Delete the drive which is not recognized, then
install the USB driver. For details, see the
procedure on page 80.
procedure on page 80.
No function works though
the power is on.
the power is on.
t Remove the battery pack, then install it again
after about one minute. If the function still do
not work, press the reset button located on the
bottom using a sharp-pointed object. (If you
press the reset button, the date and time setting
is cleared.)
not work, press the reset button located on the
bottom using a sharp-pointed object. (If you
press the reset button, the date and time setting
is cleared.)
Symptom
Cause and/or Solution