Sony DSC-P7/P9 User Manual
26
filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\05BAS.FM]
masterpage:Left
model name1[DSC-P7/P9]
[3-075-896-11(1)]
Using the self-timer
(continued)
(continued)
,
Center the subject in the frame,
and press the shutter button
fully down.
and press the shutter button
fully down.
The Self-timer lamp (page 8) will flash in
orange, and you will hear a beeping sound.
The image will be shot after approximately
10 seconds.
orange, and you will hear a beeping sound.
The image will be shot after approximately
10 seconds.
To cancel the self-timer during the
operation
operation
Press V (
) on the control button again.
•
If you stand in front of the camera and press the
shutter button, the focus and the exposure may
not be correctly set.
shutter button, the focus and the exposure may
not be correctly set.
Selecting a flash mode
,
Set the mode dial to
, and
press
v
( ) on the control
button repeatedly to select a
flash mode.
flash mode.
The flash mode has the following features.
No indicator (Auto):
Based on the
lighting conditions, the camera will decide
if there is enough light, and will use the
flash accordingly.
if there is enough light, and will use the
flash accordingly.
(Forced flash):
The flash will be used
regardless of the amount of ambient light.
(No flash):
The flash will not be used.
•
The recommended distance using the flash is as
follows (when [ISO] is set to [AUTO]):
follows (when [ISO] is set to [AUTO]):
–
When the zoom is set all the way to the W
side, 0.5 to 3.8 m (19
side, 0.5 to 3.8 m (19
11
/
16
inches to 12 feet
5
19
/
32
inches).
–
When the zoom is set all the way to the T
side, 0.6 to 2.4 m (23
side, 0.6 to 2.4 m (23
5
/
8
inches to 7 feet
10
1
/
2
inches).
•
If the menu is currently displayed, press MENU
first to make the menu disappear.
first to make the menu disappear.
•
You can change the brightness of the flash using
[FLASH LEVEL] in the menu settings (page 91).
[FLASH LEVEL] in the menu settings (page 91).
•
In the Auto or (Forced flash) mode, you look
at the LCD screen in a dark place, you may
notice some “noise” in the image, but this will
have no effect on the image you shoot.
at the LCD screen in a dark place, you may
notice some “noise” in the image, but this will
have no effect on the image you shoot.
•
While the flash is being charged, the /CHG
lamp flashes. After charging is completed, the
lamp goes out.
lamp flashes. After charging is completed, the
lamp goes out.
2
F2.8
4
0EV
30
2272
60min
FINE
4
2272
60min
FINE
01cov.book Page 26 Thursday, May 23, 2002 3:57 PM