Toshiba PDR-M81 User Manual

Page of 142
- 66 -
Getting
 Read
y
T
aking
Photographs
Pla
ying
Bac
k Ima
g
e
s
Other
Applications
Ad
ditional
Inf
ormation
Erasing
Ima
g
e
s
Hand
y
Functions
Photography in the Shutter Speed-priority Mode (continued)
Aperture value
Shutter speed
Press 
 or 
 to adjust the shutter speed.
The setting range is as follows:
1/1000, 1/750, 1/500, 1/350, 1/250, 1/180, 1/125, 1/90,
1/60, 1/45, 1/30, 1/20, 1/15, 1/10, 1/8, 1/6, 1/4, 1/3, 1/2,
0”7, 1”, 1”5, 2”, 3”, 4”, 6”, 8”, 10”, 15”
The shutter speed and the aperture value corresponding to the
shutter speed are displayed on the LCD monitor. If the appropriate
combination cannot be set even if the aperture is adjusted to its
limit, the aperture value is displayed in red. Photography, however,
is possible in this state.
Press   to increase shutter speed. Press   to decrease shutter speed.
Exposure compensation (➲ Page 69) using   or  , and manual setting (➲ Page 58) or film speed
setting (➲ Page 78) using ENTER are also possible.
Compose the picture, press the shutter button down halfway, and press it down
fully. 
 Page 40
The camera takes the picture.
Memo
• When the shutter speed is set to a speed of 0.7 second or slower, photographs are taken as extended
exposures (➲ Page 68).
• In AEB photography (➲ Page 71) or burst photography, the shutter speed cannot be set to 0.7 second or longer.
• If a mode other than [ 
 ] suppressed flash mode is set in flash photography, the shutter speed is
limited to between 1/2 second and 1/250 second.
• If the shutter speed is set to 1/350 second or less, the shutter speed is automatically changed to 1/250
second if the flash setting is changed to the [   ] forced flash mode or [ 
 ] red-eye forced flash mode.
• If the [   ] forced flash or [ 
 ] red-eye forced flash mode is set in flash photography when the
shutter speed is set to a speed of 0.7 second or more, the shutter speed is automatically changed to
1/2 second.
If the shutter speed value is set to 1/1000 second, the aperture value is limited to between F8 and F3.4.