Toshiba IK-WB01A User Manual

As shown in the figure below, use a wire clamp to
fix the plug in place

・For the wire clamp, use the self-tapping screw supplied with the camera

to hold.

・When  the  plug  is  fixed  in  place,  check  that  it  will  not  become

disconnected by a moderate amount of pulling.

Turning on the Power

The camera has no main power switch or button. To turn the power on,
insert the plug of the power cord into a power outlet.
Turn the power on after you have installed the camera.

●

If you turn the power on without connecting the LAN cable, the network
camera starts in wireless LAN mode.

●

If you connect the LAN cable and then turn the power on, the network camera
starts in ordinary LAN mode.