Veo 802.11b User Manual
Page 53 of 69
For ID #1:
Service Port:
80
Server IP:
Type in the camera's IP address, for example: 192.168.0.3
Enabled/Disabled:
Enabled
For ID #2:
Service Port:
1600
Server IP:
Type in the camera's IP address, for example: 192.168.0.3
Enabled/Disabled:
Enabled
4) Save your settings. The Observer should now be configured to work with your router and be accessible from
the Internet.
DI-714
1) Log into your router.
2) On the main page, click on Advanced Settings at the top of the page.
3) Click on Virtual Server Settings on the left side of the page.
4) Enter the camera's IP address into the Internal IP field. Under Service, select All and then click Submit to
save your settings. The Observer should now be configured to work with your router and be accessible from the
Internet.
DI-714P+
1) Log into your router.
2) On the main page, click on Advanced at the top of the page.
3) On the left side of the page, click Virtual Server.
4) Enter the following information on the page:
For ID #1:
the Internet.
DI-714
1) Log into your router.
2) On the main page, click on Advanced Settings at the top of the page.
3) Click on Virtual Server Settings on the left side of the page.
4) Enter the camera's IP address into the Internal IP field. Under Service, select All and then click Submit to
save your settings. The Observer should now be configured to work with your router and be accessible from the
Internet.
DI-714P+
1) Log into your router.
2) On the main page, click on Advanced at the top of the page.
3) On the left side of the page, click Virtual Server.
4) Enter the following information on the page:
For ID #1:
Service Port:
80
Server IP:
Type in the camera's IP address, for example: 192.168.0.3
Enabled/Disabled:
Enabled
For ID #2:
Service Port:
1600
Server IP:
Type in the camera's IP address, for example: 192.168.0.3
Enabled/Disabled:
Enabled
5) Click Apply to save your settings. The Observer should now be configured to work with your router and be
accessible from the Internet.
accessible from the Internet.
Linksys (http://www.linksys.com)
EtherFast Cable/DSL Router - [BEFSR41]
Instant Broadband EtherFast Cable/DSL Firewall Router with 4-Port Switch/VPN EndPoint - [BEFSX41]
Wireless Access Point Router with 4-Port Switch - Version 2 - [BEFW11S4]
1) Log into your router.
2) On the router's main page, click on Advanced at the top of the page.
3) On the next page, click on Forwarding.
4) Enter the following information on the page:
Line #1:
Customized Applications:
VeoWeb
Ext. Port:
80 to 80
Protocol:
TCP
IP Address:
Type in the camera's IP address, for example: 192.168.1.101
Enable:
Checked in
Line #2:
Customized Applications:
VeoCam
Ext. Port:
1600 to 1600
Protocol:
TCP
IP Address:
Type in the camera's IP address, for example: 192.168.1.101