Pentax 10720 User Manual

You can transfer images to your computer via wireless LAN by 
using a memory card with a built-in wireless LAN (Eye-Fi card).
Select the camera action when using 
an Eye-Fi card in [Eye-Fi 
Communication] of [Eye-Fi] in the D2 
menu.

u

• Be sure to set up a wireless LAN access point on a computer 

for the Eye-Fi card connection.

• For RAW images and movie files, the success of transfer 

depends on the specifications and settings of the Eye-Fi card 
in use.

• Images may not be transferred when the battery level is low.
• It may take time to transfer a large number of images. The 

camera may turn off if the internal temperature of the camera 
becomes high.

• For precautions on the Eye-Fi card, refer to “About Eye-Fi 

Cards” (p.91).

t

• [Eye-Fi] of the 

D

2 menu cannot be selected when an Eye-Fi 

card is not inserted.

• When an Eye-Fi card is used, 100 images can be stored in a 

single folder. For RAW+ images, two files are counted as one 
image.

• Select [Communication Info] to check the firmware version of 

the Eye-Fi card.

You can select the images to transfer. 

Set [Eye-Fi Communication] to [SELECT] in 
[Eye-Fi] of D2 menu.

Select e in the playback mode palette.

The screen for selecting a transfer option appears.

Select the desired option and press E.

The folder selection screen appears.

Select a folder and press E.

The image selection screen appears.
When [Select a folder] is selected, proceed to Step 7.

Images that have already been 
transferred and movies cannot 
be selected.

D

2

Transfers automatically when images are taken, new 
images are saved, or images are overwritten.
Only movies under 2 GB can be transferred.

Transfers images that are selected in playback mode.
Only JPEG and RAW images can be transferred.

Turns off the wireless LAN function. (Default setting)

Select image(s) Up to 100 images can be selected in 

one folder.

Transfers all images that can be 
transferred in the selected folder.